The UltraLite-mk3 is really two devices in one: an audio interface plus a 10 x 14 digital mixer. In fact, you could even think of the UltraLite-mk3 as a digital mixer in a half rack-space form factor.

Operating as either a computer interface or stand-alone, the UltraLite-mk3 provides DSP-driven digital mixing with effects processing (reverb, EQ and compression) for all 10 inputs and 14 outputs. You can connect all your gear and then mix, process and monitor everything from the UltraLite-mk3’s main outs or headphone jacks.

A 10 input by 14 bus digital mixer with effects

All I/O is routed to the on-board 14-bus (7 stereo) digital mixer driven by hardware-based DSP with 32-bit floating point precision. The mixer allows you to apply no-latency effects processing to inputs, outputs or busses directly in the UltraLite-mk3 hardware, independent of the computer. Effects can be applied when the UltraLite-mk3 is operating stand-alone (without a computer) as a complete rack-mounted mixer. Input signals to the computer can be recorded wet, dry, or dry with a wet monitor mix (for musicians during recording, for example).

Complete mixing at your fingertips

All of the mixer settings in the UltraLite-mk3 are accessible from the programmable front-panel backlit LCD. You can also launch the CueMix FX™ control software for Mac OS X, Windows XP and Windows Vista. CueMix FX provides complete on-screen access to the UltraLite-mk3's on-board, hardware-based mixing environment.